Oil Check on Cat 5 task card

Lay absorbent pads / rags under engines.

warm up engines for 5�10 minutes at idle (oil flows out easier when warm, not hot)

Insert extractor hose into dipstick tube, pump until it is empty.

Remove old oil filter with wrench.

Check gasket face is clean (old O-ring not stuck).

Lightly oil the O-ring of new filter.

Spin on new filter

Pour fresh oil (about 6.5 L), using funnel.

Start engine, let idle 2�3 minutes, then turn of

Check Levels and complete

Wipe engine bay clean, remove rags and pads.

Log hours and dates